Dr. Ir. Irwansyah, ST, M.Eng., IPM
Tentang Saya (About Me)
Irwansyah receives the Graduate degrees from the Mechanical Engineering Departments, Syiah Kuala University, Indonesia, in 2001, and the Master of Engineering degree in Design and Manufacturing Engineering from the Graduate School of Engineering and Technology, Asian Institute of Technology, Thailand, in 2008. He recieves Doctoral degree in Mechanical Engineering Department, National Central University, Taiwan, R.O.C, in 2019. He is currently a senior lecturer at Mechanical Engineering Department. His also actively participate as a member in Machine Design and Construction Laboratory to offer several supporting efforts in research development, educational teaching and community service. He research works currently interested in Engineering Design,CAD/CAM/CAE, Rapid Design/Prototyping/Reverse Engineering, and Precision Measurement system.
irwansyah@usk.ac.id
http://www.researcherid.com/rid/C-7264-2019
Publikasi (Publications)
Jurnal (Journals)
Irwansyah Irwansyah, Muhammad Dirhamsyah, Edwar Iswardy, Teuku Nanta Aulia, Marzuki Alkindi, Suci Nai Diah Fitrian, 2024, Experimental Study of Strain Measurement using 2D Digital Image Correlation on Fixation Plate and Calcaneus Bone Fracture, Journal of Physics: Conference Series, 2739, , doi:10.1088/1742-6596/2739/1/012049.
Irwansyah Irwansyah, Muhammad Dirhamsyah, Edwar Iswardy, Teuku Nanta Aulia, Marzuki Alkindi, Suci Nai Diah Fitrian, 2024, Experimental Study of Strain Measurement using 2D Digital Image Correlation on Fixation Plate and Calcaneus Bone Fracture, Journal of Physics: Conference Series, 2739, , doi:10.1088/1742-6596/2739/1/012049.
Khazanna, S Fitriyani, R Safitri, K Lahna, E Yusibani, Irwansyah and E Iswardy, 2024, Dielectrophoretic force characteristics toward Lactobacillus casei on an oblique-patterned electrode, Journal of Physics Conference Series, , , .
I. Irwansyah, Jiing-Yih Lai and Pei-Yuan Lee, 2019, Repositioning bone fragments using registration of paired-points and assisted -constraints in virtual bone reduction surgery, Biomedical Engineering: Applications, Basis and Communications, Vol. 3, 1950021-1 - 1950021-14, ISSN (print): 1016-2372 | ISSN (online): 1793-7132.
Irwansyah Idram, Jiing-Yih Lai and Pei-Yuan Lee, 2019, A reliable method for morphological measurement of 3D calcaneus models from computed tomography images, Biomedical Research, Vol. , 149-159, ISSN: 0970-938X (Print) | 0976-1683 (Electronic).
Irwansyah Idram, Redyarsa Dharma Bintara, Jiing-Yih Lai, Terence Essomba and Pei-Yuan Lee, 2019, Development of Mesh-defect Removal Algorithm to Enhance the Fitting of 3D-printed Parts for Comminuted Bone Fracture, Journal of Medical and Biological Engineering, 39, 855–873 , 1609-0985 (print), 2199-4757 (Electronic).
Yoga Dwi Pranata, Kuan-Chung Wang, Jia-Ching Wang, Irwansyah Idram, Jiing-Yih Lai, Jia-Wei Liu, I-Hui Hsieh, 2019, Deep learning and SURF for automated classification and detection of calcaneus fractures in CT images, Computer Methods and Programs in Biomedicine, Vol. 1, 27-37, ISSN: 0169-2607.
Sinh Nguyen Phu, Terence Essomba, Irwansyah Idram, and Jiing-Yi Lai, 2019, Kinematic analysis and evaluation of a hybrid mechanism for computer assisted bone reduction surgery, Mechanical Science, 10, 589–604, ISSN 2191-9151 eISSN 2191-916X.
Thittikorn Phattanaphibul, Pisut Koomsap, Irwansyah Idram, and Suchart Nachaisi, 2014, Development of SVM rapid prototyping for scaffold fabrication, Rapid Prototyping Journal, Vol. 2, 90-104, ISSN: 1355-2546.
Hamdani, Razali Thaib, Irwansyah, Dailami, T.M.I. Mahlia, 2014, Experimental Investigation on Melting Heat Transfer of Paraffin Wax-Al2O3 Storage System, International Journal of Applied Engineering Research, Vol. 9, 17903-17910, ISSN 0973-4562.
Razali Thaib, Hamdani, Irwansyah and Zaini, 2014, Investigation performance of solar water heater system using paraffin wax, ARPN : Journal of Engineering and Applied Sciences (JEAS), 9, 1749-1752, ISSN 1819-6608.
Khairil, Irwansyah Irwansyah, Hamdani Sarwo Edhy, Samsul Rizal, 2012, Fundamental Study on the Carbonization Characteristics of Low Rank Coal Under Low Temperature and its Application on Traditional Blacksmith, Advanced Materials Research , 576, 615-618, ISSN: 1662-8985.
Irwansyah, Masri Ibrahim, Hendra Ferdiansyah, 2012, Influence of Water-Jet Nozzle Geometry on Cutting Ability of Soft Material , Jurnal Rekayasa Kimia dan Lingkungan, Vol. 9, 6-11, 1412-5064.
Irwansyah, Koomsap P, Phattanaphibul T., 2011, Exploring SVM Rapid Prototyping in Scaffold Fabrication, Applied Science and Engineering Progress, Volume, 71-76, ISSN: 2672-9156, E-ISSN 2673-0421.
Khairil, Irwansyah dan Udink Aulia, 2011, Pengaruh Temperatur Karbonisasi dan Gasifikasi Terhadap Kualitas Kokas Pada Industri Peleburan Besi, Jurnal Teknik Mesin, Vol. 1, 215-221, 1411-9471.
Irwansyah dan M. Hafidz Mubarrak, 2011, Studi Penerapan Teknik Structure Light System Pada Pemindaian Benda Tiga Dimensi, Jurnal Teknik Mesin Indonesia, Vol. , , 1907-350X.
Hamdani, Irwansyah, 2010, Wind Power Generator for Small Scale Ice Factory for Economy Development at Rural Area in Aceh, Indonesia, Journal of Energy & Environment, No. 1., 6-8, ISSN: 1985-7462,.
Prosiding (Proceedings)
Irwansyah, Asbar, Redyarsa D. Bintara, Jiing-Yih Lai, and Pei-Yuan Lee, 2021, Three Dimensional Modeling Fractured Bone Reconstruction Using CT Scan Images, Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME),
Asbar, Amir Zaki Mubarak, Muhardian Supanji, irwansyah, and Irwansyah, 2021, Stress Analysis of the LN2 Storage Container on Head and Nozzles Using Finite Element Method, Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), Banda Aceh, 13-14 Oktober 2020, Springer Nature Singapore PTc Ltd, Lecture Notes in Mechanical Engineering, , 2195-4356.
Asbar Razali, Amir Zaki Mubarak, Marzuki Alkindi, N H Aprilia, Irwansyah Idram, 2019, Analytical study vessel design of the portable patchouli oil steam boiler based on vacuum technology, International Conference on Experimental and Computational Mechanics in Engineering (ICECME) 2019, , Banda Aceh, 18-19 September 2019, Banda Aceh, IOP Conference, , 17578981, 1757899X.
Irwansyah, 2018, Rekonstruksi Virtual 3D CAD Model dan 3D Printing dari Data Pencitraan Medik Computed Tomography, Constructing the Techno-Creative Entrepreneur Ecosystem in The 4.0 Industrial Era, Annual Indonesia Scholar Conference in Taiwan (i3S 2018), Conference Hall, College of Law, Tunghai University, Taichung, Taiwan, 17 November 2018, Banda Aceh, Indonesia, PPI Taiwan, , 2086-5953.
Irwansyah, Redyarsa, D.B., Lai, J.Y., Essomba, T., and Lee, P.Y, 2018, Detecting and Removing Overlap Meshes for the Assembly of 3D-Printed Fractured Bones, Proceeding of 4th IEEE International Conference on Applied System Innovation 2018, , Chiba, Japan, 13-17 April 2018, , Institute of Electrical and Electronics Engineers (IEEE), 362-365, 978-1-5386-4342-6.
Irwansyah, Jiing-Yih Lai, Terence Essomba, Pei-Yuan Lee, 2018, Measurement and Analysis of Calcaneus Morphometric Parameters from Computed Tomography Images, The 5th International Conference on Biomedical and Bioinformatics Engineering, , Okinawa, Japan, 12 - 14 November 2018, , The Association for Computing Machinery (ACM), 82-86, 978-1-4503-6561-1.
Irwansyah, Jiing-Yih Lai, Terence Essomba, Pei-Yuan Lee, 2017, Study on Repositioning of Comminuted Fractured Bones for Computer-Aided Preoperative Planning, , 2017 4th International Conference on Biomedical and Bioinformatics , Seoul, Republic of Korea, 12 - 14 November 2017, New York, NY, United States , Association for Computing Machinery, 0, ISBN: 978-1-4503-5484-4.
Irwansyah, Lai, J.Y., Lee, P.Y., 2016, Algorithm for segmentation and reduction of fractured bones in computer-aided preoperative surgery, , ICBBE '16: Proceedings of the 3rd International Conference on Biomedical and Bioinformatics Engineering, Taipei,Taiwan, 12-14 November 2016, New York, NY, United States, Association for Computing Machinery, 0, ISBN: 978-1-4503-4824-9.
Irwansyah, Jiing-Yih Lai, Pei-Yuan Lee, Chen-Yuan Chung, 2016, Development and clinic study of an integrated preoperative planning system for orthopaedic surgery, Advances in Science, Technology and Application, XIV International Symposium on the 3-D Analysis of Human Movement, Taipei, Taiwan, 18-21 Juli 2016, Taipei, Taiwan, Technical Group of the International Society of Biomechanics, 0, .
Irwansyah, Hamdani, Razali, Asbar R dan Masri I, 2014, Rekayasa Desain Sistem Kompresi Biogas Menggunakan Metode Analisis Robust Desain, Penguatan Kemampuan Inovasi dan Penguasaaan Teknologi Berbasis Sumber Daya Alam Dalam Rangka Mendukung Pengembangan Industri Subtitusi Impor, Seminar Nasional Hasil Riset dan Standarisasi Industri IV, Banda Aceh, Indonesia, 5-6 November 2014, Banda Aceh, Indonesia, Balai Riset dan Standarisasi Industri , , 2302-9617.
Amir Zaki Mubarak, Reza P. Munirwan, Irwansyah, Asbar, 2014, Pemodelan Numerik Karakteristik Dinamik Sistem Roda Gila Pada Sepeda Statis, Penguatan Kemampuan Inovasi dan Penguasaaan Teknologi Berbasis Sumber Daya Alam Dalam Rangka Mendukung Pengembangan Industri Subtitusi Impor, Seminar Nasional Hasil Riset dan Standarisasi Industri IV, Banda Aceh, Indonesia, 5-6 November 2014, Banda Aceh, Indonesia, Balai Riset dan Standarisasi Industri , , 2302-9617.
Irwansyah, Razali dan Asbar R, 2013, Perencanaan dan Pengembangan Alat Kompresi Biogas Tenaga Mekanik Skala Rumah Tangga, Pengembangan Potensi Produksi Energi dan Ekonomi Menuju Kemandirian Daerah, Seminar Nasional Yusuf Benseh 2013, Lhokseumawe, Indonesia, 11-12 desember 2013, Lhokseumawe, Indonesia, Politeknik Negeri Lhokseumawe, , 978-602-17282-2-2.
Hamdani, Irwansyah, 2012, Wind Power Generator for Small Scale Fish Processing Unit at Coastal Area in Aceh, Indonesia , The Proceedings of 2nd Annual International Conference Syiah Kuala University 2012 & 8 th IMT-GT Uninet Biosciences Conference, AIC Universitas Syiah Kuala, Banda Aceh, 22-24 November 2012, Universitas Syiah Kuala, , , .
Irwansyah, Hamdani, Razali, Pribadyo, Anwar, 2012, Perancangan, Pembuatan dan Pengujian Purwarupa Turbin Aliran Aksial Untuk Pembangkit Energi Listrik Mikro Hidro Head Rendah di Aceh, Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih, Seminar Nasional Energi Terbarukan dan Produksi Bersih, Fakultas Teknik Universitas Lampung, 2012, Universitas Lampung, Universitas Lampung, 0, 978-979-8510-4-96.
Anan Niazi, Hamdani, Irwansyah, 2012, Kaji Prospek Pemanfaatan Turbin Angin Kecepatan Rendah untuk Pembangkit Energi Listrik di Desa Langi Kepulauan Simeulue, Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih, Seminar Nasional Energi Terbarukan dan Produksi Bersih, Fakultas Teknik Universitas Lampung, 2012, Universitas Lampung, Universitas Lampung, 0, 978-979-8510-4-96.
Irwansyah, 2011, Pengembangan Mesin Rapid Prototyping Berbasis Teknik Selective Vacuum Manufacturing, Peranan Teknologi Dalam Peningkatan Kualitas lllasyarakat, Seminar Nasional Ke 3 Teknologi dan Rekayasa, Fakultas Teknik Universitas Islam Sumatera Utara, Medan, Sumatera Utara, Indonesia, 26-29 April 2011, Jl. Sisingamangaraja Teladan Medan, Sumatera Utara, Indonesia, Fakultas Teknik Universitas Islam Sumatera Utara, , 978-602-96853-1-2.
Hamdani dan Irwansyah, 2011, Pengujian Pembangkit Listrik Tenaga Bayu (PLTB) 10 KW di Desa Lancang Paru Kabupaten Pidie Jaya, Peranan Teknologi Dalam Peningkatan Kualitas Masyarakat, Seminar Nasional Ke 3 Teknologi dan Rekayasa, Fakultas Teknik Universitas Islam Sumatera Utara, Medan, Sumatera Utara, Indonesia, 26-29 April 2011, Jl. Sisingamangaraja Teladan Medan, Sumatera Utara, Indonesia, Fakultas Teknik Universitas Islam Sumatera Utara, , 978-602-96853-1-2.
Khairil, Irwansyah, Jalaluddin, 2011, Fundamental Study on the Effect of Gasification Temperature on Coke Quality for Blast Furnace Operation, The 8th Asia Pacific Conference on Sustainable Energy & Technology, The 8th Asia Pacific Conference on Sustainable Energy & Technology, Adelaide, Australia, 10-13 July 2011, Centre for Enenrgy Technology, The University of Adelaide, Australia, Centre for Enenrgy Technology, The University of Adelaide, Australia, , 1662-8985.
Irwansyah and Muhammad Baiquni, 2011, Study of Inverse Kinematic Methods on Earthquake Simulator Model, 6th Annual Internasional Workshop and Expo on Sumatra Tsunami Disaster and Recovery (AIWEST-DR 2011) , The Annual International Workshop and Expo on Sumatra Tsunami Disaster Recovery (AIWEST-DR) 2011 , Banda Aceh, Indonesia, 22-24 November 2011, Banda Aceh, Indonesia, The Annual International Workshop and Expo on Sumatra Tsunami Disaster Recovery (AIWEST-DR) 2011 , , .
Irwansyah, Udink Aulia, M. Hafidz Mubarrak, 2010, Study of Use Structure Light Systems for 3D Scanning Rehabilitation Assistive Device, Proceeding 5th Annual International Workshop and Expo on Sumatra Tsunami Disaster & Recovery, The 5th Annual International Workshop and Expo on Sumatra Tsunami Disaster & Recovery, Banda Aceh Indonesia, 23- 25 November 2010, Banda Aceh, Indonesia, TDMRC UNSYIAH, , -.
Hamdani, Irwansyah, 2010, Development of Microhydro Power for Encouraging Small Scale Coffee Processing in Geumpang-Aceh, Proceeding ICCHT 2010 - 5th International Conference on Cooling and Heating Technologies, The 5th International Conference on Cooling and Heating Technologies. Bandung, Indonesia, Sasana Budaya Ganesha Institut Teknolohi Bandung (ITB) Bandung Indonesia, 9-11 Desember 2010, Faculty of Mechanical and Aerospace Engineering, ITB, Bandung Indonesia, Faculty of Mechanical and Aerospace Engineering, ITB, , 1976-278X.
Irwansyah, Hendra Ferdiansyah, 2010, Study of Water-jet Cutting Technology for Improving Agriculture Products, Proceeding ChESA 2010, National Conference on Chemical Engineering Science and Applications (ChESA) 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, , 1693-3044.
Hamdani, Irwansyah, Muhajir and Subhan, 2010, Microhydro Power for Small Scale Coffee Processing, Green Engineering: Challenge for Chemical Engineers in The Future , National Conference on Chemical Engineering Science and Applications (ChESA) 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, 22 December 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, , 1693-3044.
Khairil dan Irwansyah, 2010, Kaji Eksperimental Teknologi Pembuatan Kokas Dari Batubara Sebagai Sumber Panas dan Karbon Pada Tanur Tinggi (Blast Furnace), Peran Serta Teknik Mesin dalam Peningkatan Mutu dan Pemanfaatan Hasil Riset di Indonesia, Seminar Nasional Tahunan Teknik Mesin IX 2010, Palembang, Sumatera Selatan, Indonesia, 13 - 15 Oktober 2010, Palembang, Sumatera Selatan, Indonesia, Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya, , ISBN : 978-602-97742-0-7.
Irwansyah dan M. Hafidz Mubarrak, 2010, Studi Penerapan Teknik Structure Light System Pada Pemindaian Benda Tiga Dimensi , Peran Serta Teknik Mesin dalam Peningkatan Mutu dan Pemanfaatan Hasil Riset di Indonesia, Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-9 , Palembang, 13-15 Oktober 2010, Palembang, Sumatera Selatan, Indonesia, Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya, 0, ISBN : 978-602-97742-0-7.
Asbar, Amir Zaki Mubarak, Muhardian Supanji, irwansyah, and Irwansyah, 2021, Stress Analysis of the LN2 Storage Container on Head and Nozzles Using Finite Element Method, Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), Banda Aceh, 13-14 Oktober 2020, Springer Nature Singapore PTc Ltd, Lecture Notes in Mechanical Engineering, , 2195-4356.
Asbar Razali, Amir Zaki Mubarak, Marzuki Alkindi, N H Aprilia, Irwansyah Idram, 2019, Analytical study vessel design of the portable patchouli oil steam boiler based on vacuum technology, International Conference on Experimental and Computational Mechanics in Engineering (ICECME) 2019, , Banda Aceh, 18-19 September 2019, Banda Aceh, IOP Conference, , 17578981, 1757899X.
Irwansyah, 2018, Rekonstruksi Virtual 3D CAD Model dan 3D Printing dari Data Pencitraan Medik Computed Tomography, Constructing the Techno-Creative Entrepreneur Ecosystem in The 4.0 Industrial Era, Annual Indonesia Scholar Conference in Taiwan (i3S 2018), Conference Hall, College of Law, Tunghai University, Taichung, Taiwan, 17 November 2018, Banda Aceh, Indonesia, PPI Taiwan, , 2086-5953.
Irwansyah, Redyarsa, D.B., Lai, J.Y., Essomba, T., and Lee, P.Y, 2018, Detecting and Removing Overlap Meshes for the Assembly of 3D-Printed Fractured Bones, Proceeding of 4th IEEE International Conference on Applied System Innovation 2018, , Chiba, Japan, 13-17 April 2018, , Institute of Electrical and Electronics Engineers (IEEE), 362-365, 978-1-5386-4342-6.
Irwansyah, Jiing-Yih Lai, Terence Essomba, Pei-Yuan Lee, 2018, Measurement and Analysis of Calcaneus Morphometric Parameters from Computed Tomography Images, The 5th International Conference on Biomedical and Bioinformatics Engineering, , Okinawa, Japan, 12 - 14 November 2018, , The Association for Computing Machinery (ACM), 82-86, 978-1-4503-6561-1.
Irwansyah, Jiing-Yih Lai, Terence Essomba, Pei-Yuan Lee, 2017, Study on Repositioning of Comminuted Fractured Bones for Computer-Aided Preoperative Planning, , 2017 4th International Conference on Biomedical and Bioinformatics , Seoul, Republic of Korea, 12 - 14 November 2017, New York, NY, United States , Association for Computing Machinery, 0, ISBN: 978-1-4503-5484-4.
Irwansyah, Lai, J.Y., Lee, P.Y., 2016, Algorithm for segmentation and reduction of fractured bones in computer-aided preoperative surgery, , ICBBE '16: Proceedings of the 3rd International Conference on Biomedical and Bioinformatics Engineering, Taipei,Taiwan, 12-14 November 2016, New York, NY, United States, Association for Computing Machinery, 0, ISBN: 978-1-4503-4824-9.
Irwansyah, Jiing-Yih Lai, Pei-Yuan Lee, Chen-Yuan Chung, 2016, Development and clinic study of an integrated preoperative planning system for orthopaedic surgery, Advances in Science, Technology and Application, XIV International Symposium on the 3-D Analysis of Human Movement, Taipei, Taiwan, 18-21 Juli 2016, Taipei, Taiwan, Technical Group of the International Society of Biomechanics, 0, .
Irwansyah, Hamdani, Razali, Asbar R dan Masri I, 2014, Rekayasa Desain Sistem Kompresi Biogas Menggunakan Metode Analisis Robust Desain, Penguatan Kemampuan Inovasi dan Penguasaaan Teknologi Berbasis Sumber Daya Alam Dalam Rangka Mendukung Pengembangan Industri Subtitusi Impor, Seminar Nasional Hasil Riset dan Standarisasi Industri IV, Banda Aceh, Indonesia, 5-6 November 2014, Banda Aceh, Indonesia, Balai Riset dan Standarisasi Industri , , 2302-9617.
Amir Zaki Mubarak, Reza P. Munirwan, Irwansyah, Asbar, 2014, Pemodelan Numerik Karakteristik Dinamik Sistem Roda Gila Pada Sepeda Statis, Penguatan Kemampuan Inovasi dan Penguasaaan Teknologi Berbasis Sumber Daya Alam Dalam Rangka Mendukung Pengembangan Industri Subtitusi Impor, Seminar Nasional Hasil Riset dan Standarisasi Industri IV, Banda Aceh, Indonesia, 5-6 November 2014, Banda Aceh, Indonesia, Balai Riset dan Standarisasi Industri , , 2302-9617.
Irwansyah, Razali dan Asbar R, 2013, Perencanaan dan Pengembangan Alat Kompresi Biogas Tenaga Mekanik Skala Rumah Tangga, Pengembangan Potensi Produksi Energi dan Ekonomi Menuju Kemandirian Daerah, Seminar Nasional Yusuf Benseh 2013, Lhokseumawe, Indonesia, 11-12 desember 2013, Lhokseumawe, Indonesia, Politeknik Negeri Lhokseumawe, , 978-602-17282-2-2.
Hamdani, Irwansyah, 2012, Wind Power Generator for Small Scale Fish Processing Unit at Coastal Area in Aceh, Indonesia , The Proceedings of 2nd Annual International Conference Syiah Kuala University 2012 & 8 th IMT-GT Uninet Biosciences Conference, AIC Universitas Syiah Kuala, Banda Aceh, 22-24 November 2012, Universitas Syiah Kuala, , , .
Irwansyah, Hamdani, Razali, Pribadyo, Anwar, 2012, Perancangan, Pembuatan dan Pengujian Purwarupa Turbin Aliran Aksial Untuk Pembangkit Energi Listrik Mikro Hidro Head Rendah di Aceh, Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih, Seminar Nasional Energi Terbarukan dan Produksi Bersih, Fakultas Teknik Universitas Lampung, 2012, Universitas Lampung, Universitas Lampung, 0, 978-979-8510-4-96.
Anan Niazi, Hamdani, Irwansyah, 2012, Kaji Prospek Pemanfaatan Turbin Angin Kecepatan Rendah untuk Pembangkit Energi Listrik di Desa Langi Kepulauan Simeulue, Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih, Seminar Nasional Energi Terbarukan dan Produksi Bersih, Fakultas Teknik Universitas Lampung, 2012, Universitas Lampung, Universitas Lampung, 0, 978-979-8510-4-96.
Irwansyah, 2011, Pengembangan Mesin Rapid Prototyping Berbasis Teknik Selective Vacuum Manufacturing, Peranan Teknologi Dalam Peningkatan Kualitas lllasyarakat, Seminar Nasional Ke 3 Teknologi dan Rekayasa, Fakultas Teknik Universitas Islam Sumatera Utara, Medan, Sumatera Utara, Indonesia, 26-29 April 2011, Jl. Sisingamangaraja Teladan Medan, Sumatera Utara, Indonesia, Fakultas Teknik Universitas Islam Sumatera Utara, , 978-602-96853-1-2.
Hamdani dan Irwansyah, 2011, Pengujian Pembangkit Listrik Tenaga Bayu (PLTB) 10 KW di Desa Lancang Paru Kabupaten Pidie Jaya, Peranan Teknologi Dalam Peningkatan Kualitas Masyarakat, Seminar Nasional Ke 3 Teknologi dan Rekayasa, Fakultas Teknik Universitas Islam Sumatera Utara, Medan, Sumatera Utara, Indonesia, 26-29 April 2011, Jl. Sisingamangaraja Teladan Medan, Sumatera Utara, Indonesia, Fakultas Teknik Universitas Islam Sumatera Utara, , 978-602-96853-1-2.
Khairil, Irwansyah, Jalaluddin, 2011, Fundamental Study on the Effect of Gasification Temperature on Coke Quality for Blast Furnace Operation, The 8th Asia Pacific Conference on Sustainable Energy & Technology, The 8th Asia Pacific Conference on Sustainable Energy & Technology, Adelaide, Australia, 10-13 July 2011, Centre for Enenrgy Technology, The University of Adelaide, Australia, Centre for Enenrgy Technology, The University of Adelaide, Australia, , 1662-8985.
Irwansyah and Muhammad Baiquni, 2011, Study of Inverse Kinematic Methods on Earthquake Simulator Model, 6th Annual Internasional Workshop and Expo on Sumatra Tsunami Disaster and Recovery (AIWEST-DR 2011) , The Annual International Workshop and Expo on Sumatra Tsunami Disaster Recovery (AIWEST-DR) 2011 , Banda Aceh, Indonesia, 22-24 November 2011, Banda Aceh, Indonesia, The Annual International Workshop and Expo on Sumatra Tsunami Disaster Recovery (AIWEST-DR) 2011 , , .
Irwansyah, Udink Aulia, M. Hafidz Mubarrak, 2010, Study of Use Structure Light Systems for 3D Scanning Rehabilitation Assistive Device, Proceeding 5th Annual International Workshop and Expo on Sumatra Tsunami Disaster & Recovery, The 5th Annual International Workshop and Expo on Sumatra Tsunami Disaster & Recovery, Banda Aceh Indonesia, 23- 25 November 2010, Banda Aceh, Indonesia, TDMRC UNSYIAH, , -.
Hamdani, Irwansyah, 2010, Development of Microhydro Power for Encouraging Small Scale Coffee Processing in Geumpang-Aceh, Proceeding ICCHT 2010 - 5th International Conference on Cooling and Heating Technologies, The 5th International Conference on Cooling and Heating Technologies. Bandung, Indonesia, Sasana Budaya Ganesha Institut Teknolohi Bandung (ITB) Bandung Indonesia, 9-11 Desember 2010, Faculty of Mechanical and Aerospace Engineering, ITB, Bandung Indonesia, Faculty of Mechanical and Aerospace Engineering, ITB, , 1976-278X.
Irwansyah, Hendra Ferdiansyah, 2010, Study of Water-jet Cutting Technology for Improving Agriculture Products, Proceeding ChESA 2010, National Conference on Chemical Engineering Science and Applications (ChESA) 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, , 1693-3044.
Hamdani, Irwansyah, Muhajir and Subhan, 2010, Microhydro Power for Small Scale Coffee Processing, Green Engineering: Challenge for Chemical Engineers in The Future , National Conference on Chemical Engineering Science and Applications (ChESA) 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, 22 December 2010, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, Dept. of Chemical Eng. UNSYIAH Banda Aceh Indonesia, , 1693-3044.
Khairil dan Irwansyah, 2010, Kaji Eksperimental Teknologi Pembuatan Kokas Dari Batubara Sebagai Sumber Panas dan Karbon Pada Tanur Tinggi (Blast Furnace), Peran Serta Teknik Mesin dalam Peningkatan Mutu dan Pemanfaatan Hasil Riset di Indonesia, Seminar Nasional Tahunan Teknik Mesin IX 2010, Palembang, Sumatera Selatan, Indonesia, 13 - 15 Oktober 2010, Palembang, Sumatera Selatan, Indonesia, Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya, , ISBN : 978-602-97742-0-7.
Irwansyah dan M. Hafidz Mubarrak, 2010, Studi Penerapan Teknik Structure Light System Pada Pemindaian Benda Tiga Dimensi , Peran Serta Teknik Mesin dalam Peningkatan Mutu dan Pemanfaatan Hasil Riset di Indonesia, Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-9 , Palembang, 13-15 Oktober 2010, Palembang, Sumatera Selatan, Indonesia, Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya, 0, ISBN : 978-602-97742-0-7.
Training/Diklat (Workshops)
10-06-2024, Deans\' Course Angkatan 4 2024 Forum Dekan Teknik Indonesia, Fakultas Teknik Universitas Gadjah Mada, Yogyakarta
07-10-2014, Pelatihan ToT Autodesk Inventor Tingkat Lanjut, Autodesk Inventor-Laboratorium Komputer, JTM ITS, Jurusan Teknik Mesin-Institut Teknologi Sepuluh Nopember - ITS, Surabaya
26-08-2014, Pelatihan ToT Autodesk Inventor Tingkat Dasar, Laboratorium Gambar Teknik/Lab. Center Automotive Research (CAR), Jurusan Teknik Mesin, Universitas Gunadarma
Paten (Patents)
2024, Analisis Karakteristik Galactomannan Nypa Fruticans Material Implan Soft Tissue, 000642946, Meulaboh Aceh Barat, Indonesia.
Irwansyah.
Penghargaan (Awards)
30-04-2015, Satyalancana Karya Satya, masa bakti X (sepuluh tahun), Pemerintah Republik Indonesia, Universitas Syiah Kuala, Indonesia.
16-07-2024, Satyalancana Karya Satya, masa bakti XX (Dua Puluh Tahun), Universitas Syiah Kuala, Banda Aceh, Indonesia.
