Teuku Firsa, S.T., M.Eng.Sc.

Tentang Saya (About Me)

I have been working as lecturer at Mechanical Engineering Department, Syiah Kuala University since 2008. I obtained Master degree from Engineering Design and Manufacture at University of Malaya Kuala Lumpur Malaysia. The research projects that I ever performed i.e.; Reverse Design Engineering of Disconnecting Switch For Gas Insulated Switchgear, Redesign Of Plastic Sheet Cutter Mechanism, Injector Design For Compressed Natural Gas Direct Injection and Remapping The Existing ECU and Development of The Differential Speed Mobile Robot: Hardware and Simulation. I also involve as independent auditor in Finance Internal Monitoring (SPI) University of Syiah Kuala since 2015. Previously I have ever joined with Centre for Product Design and Manufacturing (CPDM), University of Malaya, Kuala Lumpur conducted research project collaboration with Malaysia government and private sectors in machine design modification, control system, software development, robotic and manufacture. In addition to that I also have some experiences working on Disaster Management with United Nation Development Programme (UNDP) and LOGICA - Ausaid as Senior Technical Officer on Service Delivery Reform.

teuku.firsa@usk.ac.id

Publikasi (Publications)

Jurnal (Journals)

Akhyar, Akram Tamlicha, Ahmad Farhan, Azwinur, Syukran, Teuku Arif Fadhilah, Teuku Firsa, Raja Ariffin Raja Ghazilla, 2022, Evaluation of Welding Distortion and Hardness in the A36 Steel Plate Joints Using Different Cooling Media., Journal Sustainability MDPI, 14(3), 4-20, 2071-1050.

Syahriza Syahriza; Teuku Firsa; zulhalimi, 2021, Rancang Bangun CNC Foam Cutter Dengan Gerakan 3 Axis Untuk Pemotongan Dekorasi Styrofoam, Jurnal Teknik Mesin, 9, 1, 2623-0747.

Teuku Firsa, M. Tadjuddin, A. Udink, Iskandar Hasanuddin, 2020, Effect of Machining Parameters on Hole Accuracy and Burr Formation in Micro-Drilling of Brass, Defect and Diffusion Forum, , , 1662-9507.

Teuku Firsa, Zahari Taha, Raja Ariffin Raja Ghazilla, 2014, AVL BOOST SIMULATION OF ENGINE PERFORMANCE FOR COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE, Journal Energy and Environment University Tenaga Nasional, Vol 6,, 1-3, 1985-7462.

1, 1, 1, 1, 352, 1-7, 012041.

1, 1, 1, 1, , , .

1, 1, 1, , 1, , .

1, 1, 1, , 1, 501-518, .

Prosiding (Proceedings)

Mohammad Iqbal, Yulfian Aminanda, Teuku Firsa, Nazaruddin, Indera Sakti Nasution, Dadang Furqon Erawan, Dodi Andrian Saputra, Arya Rudi Nasution, 2023, The effect of fiber content and fiber orientation on bending strength of abaca fiber reinforce polymer composite fabricated by press method, AIP Conference Proceedings, 8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021, Bandar Seri Begawan, Brunei Darussalam, 8–10 November 2021, Melville, NY 11747-4300, USA, AIP Publishing LLC, Volume 2643, Issue 1, 0094-243X.

Mohd Iqbal, MS Satrianda, Teuku Firsa, Said Amir Azan, Laxman B Abhang, 2021, Bending Strength of Fiber Metal Laminate Based on Abaca Fiber Reinforced Polyester and Aluminum Alloy Metal Sheet, Key Engineering Material Vol 892, , , , , Trans Tech Publications; Trans Tech Publications Ltd, 134 - 141, 1662-9795.

Husni, Iskandar Hasanuddin, K. Hadi, Akram, Teuku Firsa, 2021, Biomechanical Posture Assessment of Salted Fish Industry Workers in West Aceh , IOP Conference Series: Materials Science and Engineering, International Conference on Experimental and Computational Mechanics in Engineering (ICECME) 2019 , Banda Aceh, 18-19 September 2019, United Kingdom, IOP Publishing Ltd, 931, 1757899X.

Teuku Firsa; Muhammad Tadjuddin; M Iqbal; R Syah Putra, 2021, Study of the Sound Absorption Characteristics of Abaca and Coconut Coir Fibers, Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering, the 2nd International Conference on Experimental and Computational Mechanics in Engineering: ICECME 2020, Banda Aceh, 13 - 14 Oktober 2020, Springer Nature Singapore Pte Ltd, The Lecture Notes in Mechanical Engineering book series (LNME) Springer, 519-531, 2195-4356.

T. Firsa, Muhammad Tadjuddin, Iskandar, Syahriza, 2021, The Development of Two Wheel Mobil Robot: Generated Path Using Simulation and Actual Path of Mobile Robot Are Compared, Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering, the 2nd International Conference on Experimental and Computational Mechanics in Engineering: ICECME 2020, Banda Aceh, 13 - 14 Oktober 2020, Springer Nature Singapore Pte Ltd, The Lecture Notes in Mechanical Engineering book series (LNME) Springer, 501-518, 2195-4356.

M Iqbal, Y Aminanda, T Firsa, M Ali, 2020, Bending strength of polyester composites reinforced with stitched random orientation and plain weave abaca fiber, IOP conference series: materials science and engineering, The 2019 6th International Conference on Advanced Materials, Mechanics and Structural Engineering , Seoul, South Korea, 18–20 October 2019, , IOP Publishing Ltd, 739 - 012035, 1757-899X.

Nurul Malahayati, Yulia Hayati, Cut Nursaniah, Teuku Firsa, 2019, Study of Interlocking Brick Costing Based on The Result of Mixed Material Variation Design, IOP Conference Series: Materials Science and Engineering, International Conference on Science and Innovated Engineering (I-COSINE) 2018, Banda Aceh, 2018, , IOP Publishing, 536, 012041.

Nurul Malahayati, Yulia Hayati, Cut Nursaniah, Teuku Firsa, Fachrurrazi and Aris Munandar, 2018, Comparative Study on the Cost of Building Public House Construction Using Red Brick and Interlock Brick Building Material in the City of Banda Aceh, IOP Conference Series: Materials Science and Engineering, The 7th AIC?ICMR on Sciences and Engineering 2017 18–20 October 2017, Banda Aceh, Indonesia, Banda Aceh, Indonesia, 18–20 October 2017, , IOP Publishing Ltd, 1-7, 1757-899X.

Muhammad Tadjuddin, Udink Aulia, Teuku Firsa, Reza Alfurqan, 2017, Strategi Mengemudi Mobil Listrik Pada Kontes Mobil Hemat Energi (KMHE) , Inovasi teknologi untuk penguatan industri nasional, Seminar Nasional Tahunan Teknik Mesin (SNTTM) , ITS Surabaya, 05- 06 oKTOBER 2017 , Surabaya, BKSTM Indonesia, 185 - 190, 978-602-51214-0-1.

Teuku Firsa; Muhammad Tadjuddin; Hendra Ahmad Farmansyah, 2017, Pengembangan CNC 4 Axis Dengan Pemodifikasian Mesin Milling EMCO TU 3 Axis , Inovasi teknologi untuk penguatan industri nasional, Seminar Nasional Tahunan Teknik Mesin - SNTTM XVI 2017, ITS Surabaya, 5 - 6 Okt 2017, Surabaya, BKSTM Indonesia, 66 - 71, 978-602-51214-0-1.

Teuku Firsa, Muhammad Tadjuddin, Iskandar, Syahriza, 2016, Path Generated and Optimized of Mobile Robot using Simulation , , Seminar Nasional Tahunan Teknik Mesin, ITB, Bandung, 5 - 6 Oktober 2016, ITB, Bandung, Fakultas Teknik Mesin dan Dirgantara ITB, 0, 978-602-96269-2-6.

Muhammad Tadjuddin,Teuku Firsa, Syahriza, Muhammad Iqbal, 2016, Uji Unjuk Kerja Pendorong Utama Autonomous Underwater Vehicle (AUV): Open Propeller dan Ducted Propeller, , Seminar Nasional Tahunan Teknik Mesin (SNTTM), ITB, Bandung, 5 - 6 Oktober 2016, Indonesia, Fakultas Teknik Mesin dan Dirgantara ITB, 0, 978-602-96269-2-6.

Teuku Firsa, Muhammad Tadjuddin, Akram, Muhajir, 2015, Gaya Potong pada Proses Gurdi Papan Blockboard, Implementasi Teknologi Rekayasa dalam Upaya Peningkatan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi Rekayasa II, Politeknik Aceh Selatan, Tapaktuan, 25 November 2015, Politeknik Aceh Selatan, Tapaktuan, Rumoh Agam dan Kampus Politeknik Aceh Selatan-Tapaktuan, 0, ISSN 2407-8735.

Muhammad Tadjuddin, Teuku Firsa, Muhammad Iqbal, 2015, Desain dan Manufaktur Monitoring Tank untuk Pengujian Karakteristik Dinamik Autonomous Underwater Vehicle (AUV), Implementasi Teknologi Rekayasa dalam Upaya Peningkatan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi Rekayasa II, Politeknik Aceh Selatan, Tapaktuan, 25 November 2015, Politeknik Aceh Selatan, Tapaktuan, Rumoh Agam dan Kampus Politeknik Aceh Selatan-Tapaktuan, 0, ISSN 2407-8735.

Teuku Firsa, Muhammad Tadjuddin, Syahriza, Saddam Husaini, 2014, PERANCANGAN DAN PEMBUATAN PROTOTIPE MESIN CNC 4 AXIS BERBASIS PC (PERSONAL COMPUTER), Penguatan kemampuan inovasi dan penguasaaan teknologi berbasis sumber daya alam dalam rangka mendukung pengembangan industri subtitusi impor, Seminar Nasional hasil riset dan standardisasi Industri IV, Baristand, Banda Aceh, 5-6 Nov 2014, Baristand, Banda Aceh, Baristand, 210, ISSN: 2302-9617.

1, 1, 1, , 1, 1, 1, 1, , 0, 1.