Prof. Dr.-Ing. Ir. Teuku Edisah Putra, S.T, M.Sc., Ph.D. IPM., ASEAN Eng
Tentang Saya (About Me)
Teuku Edisah Putra is a professor at the Department of Mechanical Engineering, Faculty of Engineering, Universitas Syiah Kuala, Banda Aceh, Indonesia since 2006. He holds a bachelor's degree in Mechanical Engineering from Universitas Syiah Kuala in 2005. He obtained his master's degree from the Department of Mechanical and Materials Engineering, Universiti Kebangsaan Malaysia, in 2010. He obtained a Dr.-Ing. and PhD from the Department of Mechatronics, Universität Duisburg-Essen, Germany, and the Department of Mechanical and Materials Engineering, Universiti Kebangsaan Malaysia, respectively, through a double degree program in 2016. His research interest includes fatigue life assessments, structural integrity and digital signal processing.
edi@usk.ac.id
www.fsd.unsyiah.ac.id/teukuedisahputra
Publikasi (Publications)
Jurnal (Journals)
M Ikbal, M Rizal, MA Rizki, N Ali, TE Putra, H Usman, 2024, A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces, International Journal of Ambient Energy, 45(1), 2394826, 01430750, 21628246.
H. Sofyan, T.E. Putra, A. Saputra, M. Mohammad, 2024, Using fuzzy C-means in selecting a suitable wavelet transform for fatigue failure analyses, Journal of Mechanical Science and Technology, 38(7), 3403-3412, 1976-3824.
T.E. Putra, Husaini, M. Ikbal, 2021, Automotive suspension component behaviors driven on flat and rough road surfaces, Heliyon, 7 (7), e07528, 2405-8440.
N. Ali, M.S. Mustafa, T. Sujitno, T.E. Putra, Husaini, 2021, Monotonic and cyclic behavior of the nitrogen ion implanted commercially pure titanium, Journal of Mechanical and Sciences (JMES), 15 (1), 7662-7670, 2289-4659.
T.E. Putra, S. Abdullah, D. Schramm, 2020, A novel way to overcome problems arising in strain signal measurements leading to a fatigue failure characterisation, International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3), 8104-8115, 2180-1606.
T.E. Putra, Husaini, M.N. Machmud, 2020, Predicting the fatigue life of an automotive coil spring considering road surface roughness, Engineering Failure Analysis, 116, 104722, 1350-6307.
T.E. Putra, S. Abdullah, D. Schramm, 2020, Effect of cycle amplitude removal of fatigue strain loadings associated to signal energy characteristics , Engineering Failure Analysis, 116, 104723, 1350-6307.
D. Asrina, T.E. Putra, Husaini, 2020, Development of a noise filtering algorithm for strain signals using the fast Fourier transform, The International Journal of Integrated Engineering, 12 (5), 191-196, 2229-838X.
N. Ali, T.E. Putra, V.Z. Iskandar, M. Ramli, 2020, A simple empirical model for predicting the weight loss of mild steel due to corrosion in NaCl solution, International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1), 7784-7791, 2180-1606.
T.E. Putra, S. Abdullah, D. Schramm, 2020, Locating damaging segments in the acceleration signal of an automotive coil spring using the wavelet transform, International Journal of Advanced Science and Technology, 29 (3), 2666-2672, 2005-4238.
Husaini, T.E. Putra, Zulfikar, 2018, Analysis of cracks on a fractured surface of the vehicle crankshaft using the finite element method, International Journal of Engineering & Technology (IJET), 7 (4.3, 1564-1568, 2227-524X.
Husaini, T.E. Putra, N. Ali, 2018, Fatigue feature clustering of modified automotive strain signals for saving testing time, International Journal of Automotive and Mechanical Engineering (IJAME), 15 (2), 5251-5272, 2180-1606.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2017, The need to generate realistic strain signals at an automotive coil spring for durability simulation leading to fatigue life assessment, Mechanical Systems and Signal Processing, 94, 432-447, 0888-3270.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2017, Reducing cyclic testing time for components of automotive suspension system utilising the wavelet transform and the Fuzzy C-Means, Mechanical Systems and Signal Processing, 90, 1-14, 0888-3270.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2015, Generating strain signals under consideration of road surface profiles, Mechanical Systems and Signal Processing, 60-61, 485-497, 0888-3270.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, 2011, The use of Morlet wavelet coefficients for identifying fatigue damage features, Pertanika Journal of Science and Technology, 19, 107-114, 0128-7680.
T.E. Putra, S. Abdullah, M.Z. Nuawi, 2011, Data scattering of fatigue damaging segmentation in order to develop the fatigue damaging and Morlet wavelet coefficient relationship, International Review of Mechanical Engineering, 5 (4), 605-610, 1970-8734.
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, L. Abdullah, A. Arifin, 2011, Extracted fatigue damaging events using the Morlet wavelet-based algorithm, The Hong Kong Institution of Engineers Transactions, 18 (1), 22-29, 1023-697X.
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2010, Wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading, Journal of Applied Sciences, 10 (4), 277-283, 1812-5654.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, The Morlet wavelet analysis for fatigue feature clustering, WSEAS Transactions on Mathematics, 5 (9), 345-354, 1109-2769.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Extracting fatigue damage features using STFT and CWT, WSEAS Transactions on Signal Processing, 3 (6), 91-100, 1790-5052.
T.E. Putra, 2009, Live load analysis on main tribune frames of the Harapan Bangsa stadium, Jurnal Pengembangan dan Penerapan Teknologi (P&PT), 7 (2), 577-581, 0854-5766.
Prosiding (Proceedings)
M. Dirhamsyah, T.E. Putra, Muhajirin, 2024, Condition monitoring on a 3-dimensional printer varying the nozzle diameter and the filament density, AIP Conference Proceedings, 3rd Conference on Innovation in Technology and Engineering Science, Padang, Indonesia, 9-10 August 2022, , , , 1551-7616.
U. Azmi, Husaini, T.E. Putra, D. Munandar, 2024, Analysis of the stress concentration on the sport utility vehicle camshaft at different conditions by using the finite element method, Lecture Notes in Mechanical Engineering, 4rd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), , 14-15 September 2022, , , , 2195-4356.
Osama, Husaini, T.E. Putra, 2024, Failure analysis of crankshaft in diesel engine vehicle using numerical method, Lecture Notes in Mechanical Engineering, , 4rd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), 14-15 September 2022, , , , 2195-4356.
T.E. Putra, Husaini, M. Ikbal, M. Rizal, A.Z. Mubarak, 2024, A fatigue life assessment of automotive coil spring and lower arm due to road surface contours, Lecture Notes in Mechanical Engineering, 4rd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), Banda Aceh, 14-15 September 2022, , , , 2195-4356.
M. Ikbal, M. Rizal, N. Ali, T.E. Putra, 2023, Effect of hybridization of ramie fibers on the vibrational and damping responses of ramie/glass/epoxy resin composite laminates, , , , , , , , .
Husaini, Osama, T.E. Putra, 2023, The analysis of crankshaft failure in a 2,500cc diesel engine vehicle using experimental method, , , , , , , , .
T. Marjuni, Husaini, T.E. Putra, 2023, Stress analysis on the lower arm and coil spring of an automotive due to dynamic loadings, Lecture Notes in Mechanical Engineering, 3rd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), Banda Aceh, 11-12 Oktober 2021, , Springer, 154-160, 2195-4356.
Azhar, Husaini, T.E. Putra, 2023, Stress analysis on an automotive coil spring due to speed effect, Lecture Notes in Mechanical Engineering, 3rd International Conference on Experimental and Computational Mechanics in Engineering (ICECME), Banda Aceh, 11-12 Oktober 2021, , Springer, 148-153, 2195-4356.
Husaini, M. Farhan, N. Ali, T.E. Putra, R. Anshari, K. Suherman, 2022, Analysis of the leaf spring failure in light duty dump truck, , , , , , , , .
R. Akmal, Husaini, T.E. Putra, 2021, The characteristics of the fatigue life of the SAE 1541 carbon steel based on the strain-life approach, , 5th International Conference on Applied Engineering, Materials and Mechanics (ICAEMM), Kuala Lumpur, Malaysia, 24-26 April 2020, , Trans Tech Publications, 73-77, 1662-9795.
M.I. Barizi, Husaini, N. Ali, R. Akmal, T.E. Putra, 2021, Failure analysis of the short drive shaft in a screw press machine, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 13-14 Oktober 2020, , Trans Tech Publications, 74-80, 1662-9795.
J. Harahap, Husaini, T.E. Putra, D. Schramm, 2021, Stress analysis on an automotive coil spring driven on flat, uphill, and downhill road surfaces, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 13-14 Oktober 2020, , Trans Tech Publications, 124-128, 1662-9795.
A. Saputra, H. Sofyan, T.E. Putra, 2021, The application of R software as a statistical tool for mechanical data clustering, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 13-14 Oktober 2020, , Springer Verlag, 401-410, 2195-4356.
A. Azri, M. Dirhamsyah, T.E. Putra, 2021, The characteristics of sound and vibration signals acquired from variated 3-dimensional printing nozzles, , Virtual Conference on Computational and Experimental Mechanics, Banda Aceh, Indonesia, 1-2 Desember 2021, , Universiti Kebangsaan Malaysia, 73-74, 978-967-2224-71-6.
Wahyudin, Husaini, T.E. Putra, 2021, Stress analysis on an automotive lower arm stered on the straight and turning roads, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 13-14 Oktober 2020, , Springer Verlag, 271-276, 2195-4356.
Husaini, N. Ali, T.E. Putra, F. Armia, Akhyar, 2020, Study on fracture failures of the super heater water pipe boiler, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 18-19 September 2019, , Trans Tech Publications, 20-26, 1662-9507.
T.E. Putra, Husaini, M. Ikbal, 2020, Effect of road surface contour to the fatigue life of a coil spring based on strain-life approach, , The 2019 6th International Conference on Advanced Materials, Mechanics and Structural Engineering, Seoul, South Korea, 18-20 Oktober 2019, , IOP Publishing Ltd., , 1757-8981.
Husaini, T.E. Putra, S. Novriandika, 2020, Study of failure analysis of a fracture crankshaft pulley used on a truck engine, , The 2019 6th International Conference on Advanced Materials, Mechanics and Structural Engineering, Seoul, South Korea, 18-20 Oktober 2019, , IOP Publishing Ltd., , 1757-8981.
Husaini, T.E. Putra, M.R. Rizky, 2020, Prediction of the fatigue life of the AISI 1513 carbon steel lower arm based on strain-life approach, , 2019 4th International Conference on Material Engineering and Application, Kuala Lumpur, Malaysia, 23-25 Agustus 2019, , IOP Publishing Ltd., , 1757-8981.
Husaini, K. Akbary, I. Hasanuddin, T.E. Putra, H. Husin, 2020, Effects of strain rate due to SMAW welding on mechanical properties of AISI 1005 low alloy steel, , The 2nd International Conference on Science and Innovated Engineering, Malacca, Malaysia, 9-10 November 2019, , IOP Publishing Ltd., , 1757-8981.
Husaini, D.M. Dawud, T.E. Putra, N. Ali, 2020, Failure analysis of spur gears used in transmission system applied on a hand tractor, , 2019 4th International Conference on Material Engineering and Application, Kuala Lumpur, Malaysia, 23-25 Agustus 2019, , Trans Tech Publications, 144-149, 1662-9795.
T.E. Putra, Husaini, H. Prakasa, 2020, Prediction of the fatigue life of the SAE 5160 carbon steel coil spring based on strain-life approach, , 2019 4th International Conference on Material Engineering and Application, Kuala Lumpur, Malaysia, 23-25 Agustus 2019, , Trans Tech Publications, 381-386, 1662-9795.
T.E. Putra, Husaini, H. Prakasa, I. Hasanuddin, M. Rizal, M.N. Machmud, 2020, Fatigue life assessments of the SAE 5160 carbon steel subjected to uphill and downhill roads strains, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 18-19 September 2019, , Trans Tech Publications, 33-38, 1662-9507.
T.E. Putra, Husaini, M. Ikbal, I. Hasanuddin, M. Rizal, M.N. Machmud, 2020, Fatigue life assessments of the AISI 1513 carbon steel subjected to road surface strains, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 18-19 September 2019, , Trans Tech Publications, 39-44, 1662-9507.
Husaini, T.E. Putra, M.R. Rizky, R. Akmal, I. Hasanuddin, M. Rizal, M. Ali, 2020, Fatigue life assessments of the AISI 1513 carbon steel of a vehicle lower arm subjected to clockwise and counter-clockwise road strains, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 18-19 September 2019, , Trans Tech Publications, 45-49, 1662-9507.
T.E. Putra, Husaini, D. Asrina, M. Dirhamsyah, 2020, The ability of the fast Fourier transform to de-noise a strain signal, , The International Conference on Experimental and Computational Mechanic in Engineering (ICECME), Banda Aceh, Indonesia, 18-19 September 2019, , IOP Publishing Ltd., , 1757-8981.
Husaini, N. Ali, S. Wathan, T.E. Putra, 2020, Numerical and experimental analyses to identify the failure of a centrifugal pump shaft, , Virtual Conference on Computational and Experimental Mechanics, Banda Aceh, Indonesia, 1-2 Desember 2020, , Universiti Kebangsaan Malaysia, 7-8, 978-967-2224-59-4.
Husaini, N. Ali, R. Riantoni, T.E. Putra, H. Husin, 2019, Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles, , International Seminar on Metallurgy and Materials (ISMM 2018), Tangerang, Indonesia, 25-26 September 2018, , IOP Publishing Ltd., , 1757-8981.
T.E. Putra, Husaini, M.R. Dongoran, 2019, Effect of vehicle speed to the fatigue life of a coil spring based on strain-life approach, , 4th International Conference on Mechanical Engineering, Yogyakarta, Indonesia, 28-29 Agustus 2019, , American Institute of Physics, , 00001984, 00002005, 00001983.
M. Ali, Husaini, T.E. Putra, N. Ali, 2019, The needs to investigate the effect of road surface vibrations to the fatigue life of a coil spring, , Conference on Innovation in Technology and Engineering Science, Padang, Indonesia, 8-9 November 2018, , IOP Publishing Ltd., , 1757-8981.
Husaini, R. Riantoni, N. Ali, T.E. Putra, 2019, Failure analysis of the leaf spring of truck Cold diesel using finite element method, , International Conference on Design and Application of Engineering Materials (IC-DAEM), Bandung, Indonesia, 6–7 September 2018, , IOP Publishing Ltd., , 1757-8981.
N. Ali, T.E. Putra, Husaini, V.Z. Iskandar, S. Thalib, 2019, Corrosion rate of low carbon steel for construction materials in various NaCl concentrations, , International Conference on Science and Innovated Engineering (I-COSINE), Sabang, Indonesia, 21-22 October 2018, , IOP Publishing Ltd., , 1757-8981.
Husaini, E. Saputra, Husni, T.E. Putra, M. Rachman, 2019, Failure analysis of a centrifugal pump shaft experiencing plastic deformation using the exact and finite element method, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, Indonesia, 12-14 September 2018, , IOP Publishing Ltd., , 1757-8981.
T.E. Putra, Husaini, N. Ali, M.N. Machmud, A. Bakhtiar, Hendrayana, 2019, Analysis of surface failure of coil spring in passenger vehicle suspension system, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, Indonesia, 12-14 September 2018, , IOP Publishing Ltd., , 1757-8981.
T.E. Putra, Husaini, N. Ali, H. Husin, Zulfikar, 2019, Failure analysis of the fracture surface of the crankshaft of a vehicle, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, Indonesia, 12-14 September 2018, , IOP Publishing Ltd., , 1757-8981.
T.E. Putra, Husaini, N. Ali, I. Hasanuddin, Hendrayana, A. Bakhtiar, 2019, Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, Indonesia, 12-14 September 2018, , IOP Publishing Ltd., , 1757-8981.
T.E. Putra, Husaini, 2018, Investigating the road surface effect to the fatigue life of an automotive coil spring, , The 7th AIC-ICMR on Science and Engineering 2017, Banda Aceh, Indonesia, 18-20 October 2017, , , , 1757-8981.
Husaini, T.E. Putra, N. Ali, 2018, The Morlet wavelet transform for reducing fatigue testing time of an automotive suspension signal, , 3rd International Conference on Mechanical Engineering, Surabaya, Indonesia, 5-6 October 2017, , , , 00001984, 00002005, 00001983.
T.E. Putra, Husaini, 2018, Identifying strain signal characteristics of automotive suspension system subjected to road surface vibrations, , 3rd International Conference on Mechanical Engineering, Surabaya, Indonesia, 5-6 October 2017, , , , 00001984, 00002005, 00001983.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Wavelet-based feature extraction algorithm for fatigue strain data associated with the k-means clustering technique, , 11th International Fatigue Congess, Melbourne, Australia, 2-7 March 2014, , , 1717-1722, 1662-8985.
S. Abdullah, T.E. Putra, D. Schramm, M.Z. Nuawi, 2014, Acceleration data extraction associating to the peak-valley segmentation approach using the Morlet wavelet transform, , 6th Chaotic Modeling and Simulation International Conference (CHAOS), Istanbul, Turkey, 11-14 June 2013, , , 69-77, 2241-0503.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, FCM-based optimisation to enhance the Morlet wavelet ability for compressing suspension strain data, , The 20th European Conference on Fracture (ECF20), Trondheim, Norway, 30 June - 4 July 2014, , , 288-294, 2211-8128.
S. Abdullah, T.E. Putra, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Generation of simulated acceleration and strain signals as the responses of a car coil spring, , The 3rd International Conference on Fracture Fatigue and Wear (FFW) , Kitakyushu, Japan, 1-3 September 2014, , , 189-194, 2294-7868.
T.E. Putra, S. Abdullah, M.Z. Nuawi, M.F.M. Yunoh, 2014, The Morlet and Daubechies wavelet transforms for fatigue strain signal analysis, , 4th International Conference on Noise, Vibration and Comfort (NVC), Kuala Lumpur, Malaysia, 27-28 November 2012, , , 197-202, 1662-7482.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Application of the wavelet transforms for compressing lower suspension arm strain data, , The 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research (ReCAR), Kuala Lumpur, Malaysia, 16-18 December 2013, , , 78-82, 1662-7482.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, M.F.M. Yunoh, 2014, Time-frequency-based fatigue data editing for automotive applications, , The International Conference on Engineering and Built Environment (ICEBE), Bangi, Malaysia , 19-20 November 2013, , , 88-91, 1991-8178.
T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2013, The Morlet wavelet-based features extraction for compressing automotive fatigue strain data, , 7th International Conference on Low Cycle Fatigue (LCF7), Aachen, Germany, 9-11 September 2013, , , 133-138, 978-3-9814516-2-7.
Z.M. Nopiah, S. Abdullah , M.N. Baharin, T.E. Putra, S.N. Sahadan, K.O. Willis, 2011, Comparative study on data editing techniques for fatigue time series signals, , The 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP), Shenzhen, China, 6-8 November 2010, , Advanced Materials Research, 1681-1684, 1662-8985.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, 2011, Vibrational fatigue analysis of a strain loading using the frequency and wavelet filtering methods, , The 8th International Conference on Fracture & Strength of Solids (ICFSS) , Kuala Lumpur, Malaysia, 7-9 Jun 2010, , , 124-129, 1662-9795.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Using Morlet wavelet coefficients to cluster variable amplitude fatigue features, , The 5th IASME / WSEAS International Conference on Continuum Mechanics, Cambridge, UK, 23-25 February 2010, , , 42-48, 1790-5095.
S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Time-frequency localisation analysis for extracting fatigue damaging events, , The 9th WSEAS International Conference on Signal Processing, Robotics and Automation (ISPRA), Cambridge, UK, 20-22 February 2010, , , 31-35, 1790-5117 .
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2010, Effectiveness of the Morlet wavelet in generating new shortened fatigue strain signal, , The 1st Regional Conference on Applied and Engineering Mathematics (RCAEM), Penang, Malaysia, 2-3 Jun 2010, , , 137-142, .
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, A pilot study of the fatigue strain signal behaviour at lower suspension arm based on road loadings, , Engineering Postgraduate Conference (EPC), Kuala Lumpur, Malaysia, 20-21 October 2009, , , , 978-983-2982-28-9.
T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, Ability of the Morlet wavelet in shortening a fatigue strain signal, , National Conference on Postgraduate Research (NCON-PGR), Pahang, Malaysia, 1 October 2009, , , 234-241, 978-967-5080814.
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, Correlation between the fatigue damage and the Morlet wavelet, , Engineering Mathematics Seminar (EMaS), Port Dickson, Malaysia, 23-25 November 2009, , , 86-91, 978-983-2982-29-6.
T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, An extraction computational algorithm based on the Morlet wavelet coefficient spectrum, , 2009 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), Kuala Lumpur, Malaysia, 18-19 November 2009, , , 68-73, 978-1-4244-5562-1.
T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, Fatigue feature clustering algorithm using the Morlet wavelet, , The 2nd WSEAS International Conference on Sensors and Signals (SENSIG '09), the 2nd WSEAS International Conference on Visualization, Imaging and Simulation (VIS '09) and the 2nd WSEAS International Conference on Materials Science (MATERIALS '09), Baltimore, USA, 7-9 November 2009, , , 82-87, 1790-5117.
T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, Identifying fatigue damaging potential locations using coefficients of the Morlet wavelet transform, , International Advanced of Technology Congress (ATCi), Kuala Lumpur, Malaysia, 3-5 November 2009, , , , 978-983-42758-4-6.
S. Abdullah, T.E. Putra, M.Z. Nuawi, 2009, Analysing the wavelet transforms of fatigue strain signals: application in the Morlet and Daubechies wavelet families, , The International Conference on Advances in Materials and Processing Technologies (AMPT), Kuala Lumpur, Malaysia, 26-29 October 2009, , , , .
T.E. Putra, 2008, Analysis of joint reactions: using aided moment method (AMM), , The 4th IMT-GT Conference on Mathematics, Statistics and Applications (ICMSA), Banda Aceh, Indonesia, 9-11 June 2008, , , 49-54, 978-602-8199-11-7.
M. Rizal, T.E. Putra, 2007, Simulasi komputer untuk memprediksi besarnya daya pemotongan pada proses pembubutan silindris, , Seminar Nasional Tahunan Teknik Mesin (SNTTM) VI, Banda Aceh, Indonesia, 20-22 November 2007, , , 545-551, 979-97726-8-0.
F.N. Balia, T.E. Putra, 2006, Strength analysis due to static load on main tribune truss of Harapan Bangsa stadium, Conference on Computational Mechanics & Numerical Analysis (CMNA), Conference on Computational Mechanics & Numerical Analysis (CMNA), Banda Aceh, Indonesia, 12-14 May 2006, , , 297-300, 1411-4984.
Buku (Books)
T.E. Putra, Husaini, R. Akmal, 2022, The effects of mean strain on the fatigue life of the SAE 1541 carbon steel based on the strain-life approach, Switzerland, Springer, 2522-5618.
S. Abdullah, T.E. Putra, M.Z. Nuawi, 2012, Eliminating the undamaging fatigue cycles using the frequency spectrum filtering techniques, United Kingdom, Intech, 978-953-51-0594-7.
